Stick-on Vinyl Installation Kit
Use for all applications. One kit will install (40) 6x6 stick-ons or (22) 8x8 stick-ons.
- 1. Prepare Surface: Should be dry, flat, free of loose debris. Fill voids.
- 2. Spray Adhesive: Mask off perimeter to reduce clean up. Dry for 15 minutes.
- Important: Stick-ons will fail if not allowed to dry
- 3. Install Stick-on: Remove paper backing, firmly press stick-on to area
- 4. Edge Sealer: Apply around edges, make sure sealer overlaps stick-on and surface. Allow to set overnight.