Filter Cleaner and Degreaser, 1 qt

Reduce the amount of time and work you spend on pool maintenance!
Sand Filter Cleaner is really effective in removing sand from the filter and its elements, keeping your filter operating efficiently. The periodic use of Sand Filter Cleaner will also help maintain good swimming pool water quality with proper filtration and chemical treatment of the sand collected in the filter. It promotes better filtration, lengthens filter cycles and reduces maintenance costs. Dosage: 8oz/100 lb sand

Automatic feeder should be turned off prior to any addition of this product. Never mix this product with any other chemical. For pools with erosion type chlorinators, always close inlet valve to chlorinator or remove chlorinator canister from unit when using filter cleaning chemicals. See chart for exact amount of this product to be used. For maximum filter performance, it is recommended that application be done at each backwashing.

To use: evenly coat elements or cartridge by using a sprayer filled with full-strength product. Wait 10 minutes, then use a garden hose to thoroughly rinse for 5 minutes. Or use a large clean plastic bucket and soak for 1 hour in one part Sand Filter Cleaner to three parts water. Backwash the filter thoroughly. Turn the pump off. Turn pump on until pump primes and product moves into filter. Leave filter selector in backwash position or in closed position. Wait one hour. Turn pump on with selector in backwash position, until backwash waste water is clear. If filter has not been degreased within 12 months, use double the amount of this product, or 1 cup per 100 lb. of sand. Pour 8 ounces of Sand Filter Cleaner into skimmer while backwashing filter. Note: Chlorine must be removed from the skimmer basket prior to addition of Sand Filter Cleaner.

Specially formulated to clean all cartridge filter elements. Our cartridge cleaner is specially formulated to remove dirt, soap, grease and film to effectively clean all cartridge filter elements in your swimming pool and keep it working efficiently and effectively.

DEEP CLEANING SOLUTION!

A highly concentrated, deep cleaning solution that removes deep set oils, grease and scum build-up on pool and spa filters. Filter Perfect improves filter efficiency and lengthens cycles between filter cleaning. Compatible with chlorine, bromine and other alternative sanitizing systems. It is very effective on cartridge elements, D.E filter grids and sand filters.

Lo-Chlor’s Filter & Tile Cleaner is a multi-purpose cleaner that cleans the pool, grill, patio furniture, or any outdoor surface. Cleaning filters or filter grids is easy with the convenient spray bottle. Just hose down what you want to clean, spray on Filter & Tile Cleaner, and then hose off. Cleans pool tiles at waterline without affecting the balance of your pool chemistry. Will make almost any surface shiny. Really grimy surfaces may need a second spray. Can also clean wood decks, PVC furniture, painted cement surfaces, and grill tops.

Reduce the amount of time and work you spend on pool maintenance!
Sand Filter Cleaner is really effective in removing sand from the filter and its elements, keeping your filter operating efficiently. The periodic use of Sand Filter Cleaner will also help maintain good swimming pool water quality with proper filtration and chemical treatment of the sand collected in the filter. It promotes better filtration, lengthens filter cycles and reduces maintenance costs. Dosage: 8oz/100 lb sand

Automatic feeder should be turned off prior to any addition of this product. Never mix this product with any other chemical. For pools with erosion type chlorinators, always close inlet valve to chlorinator or remove chlorinator canister from unit when using filter cleaning chemicals. See chart for exact amount of this product to be used. For maximum filter performance, it is recommended that application be done at each backwashing.

To use: evenly coat elements or cartridge by using a sprayer filled with full-strength product. Wait 10 minutes, then use a garden hose to thoroughly rinse for 5 minutes. Or use a large clean plastic bucket and soak for 1 hour in one part Sand Filter Cleaner to three parts water. Backwash the filter thoroughly. Turn the pump off. Turn pump on until pump primes and product moves into filter. Leave filter selector in backwash position or in closed position. Wait one hour. Turn pump on with selector in backwash position, until backwash waste water is clear. If filter has not been degreased within 12 months, use double the amount of this product, or 1 cup per 100 lb. of sand. Pour 8 ounces of Sand Filter Cleaner into skimmer while backwashing filter. Note: Chlorine must be removed from the skimmer basket prior to addition of Sand Filter Cleaner.

Specially formulated to clean all cartridge filter elements. Our cartridge cleaner is specially formulated to remove dirt, soap, grease and film to effectively clean all cartridge filter elements in your swimming pool and keep it working efficiently and effectively.

Lo-Chlor’s Filter & Tile Cleaner is a multi-purpose cleaner that cleans the pool, grill, patio furniture, or any outdoor surface. Cleaning filters or filter grids is easy with the convenient spray bottle. Just hose down what you want to clean, spray on Filter & Tile Cleaner, and then hose off. Cleans pool tiles at waterline without affecting the balance of your pool chemistry. Will make almost any surface shiny. Really grimy surfaces may need a second spray. Can also clean wood decks, PVC furniture, painted cement surfaces, and grill tops.

DEEP CLEANING SOLUTION!

A highly concentrated, deep cleaning solution that removes deep set oils, grease and scum build-up on pool and spa filters. Filter Perfect improves filter efficiency and lengthens cycles between filter cleaning. Compatible with chlorine, bromine and other alternative sanitizing systems. It is very effective on cartridge elements, D.E filter grids and sand filters.