Doheny's Master Start-Up Kit Instructions
Doheny's Start-up Master Kit Instructions
First things first! Follow these simple steps for an easy pool opening!
Remove water and debris from pool cover. Remove and empty anchoring water bags. Remove cover, clean and store it.
Clean out skimmers and main drain. Increase water level to the middle of skimmer opening.
Check filter, pump and heater for winter damage and replace all drain plugs. Start filtration system.
Kit Contents:
Master Start-Up Kit up to 30,000 gal:
- 1 L METALpro
- Excellent for well water pools
- Not affected by extremes of pH
- Will not add phosphates
- (4) 1 lb Super Shock Plus
- (2) 1 qt Spring Algaecide
- 1 qt Water Clarifier
- 1 L MAGICfree pro
- No phosphate build-up
- Prevent waterline rings
- Helps preserve pool liners and finishes
- FREE 10 pk Test Strips
Kit Steps:
- Step 1: First, add a full bottle (1 L) of Doheny’s METALpro.
Let the water circulate for two hours. - Step 2: Second, add four full bags (4 lb) of Doheny’s Super Shock Plus.
Let the water circulate for two hours. - Step 3: Third, add two full bottles (64 oz) of Doheny’s Spring Algaecide.
Let the water circulate for two hours. - Step 4: Fourth, add a full bottle (32 oz) of Doheny’s Water Clarifier.
Let the water circulate for two hours - Step 5: Last, add a full bottle (1 L) of Doheny’s MAGICfree pro.
Let the water circulate for two hours.
Pool Maintenance:
Balanced pool water helps ensure that your family swims safely and that your pool and equipment are protected from corrosion and scaling. Pool water must also be sanitized so that it is free of harmful organisms and algae. Start by testing and adjusting for proper chlorine, pH, and total alkalinity levels with your Test Strips or a Test Kit with fresh reagents.
Reading | Range |
---|---|
Chlorine | 1.0-3.0 ppm |
pH | 7.2-7.6 |
Total Alkalinity Vinyl-lined, Fiberglass and Painted Pools | 125-175 ppm |
Total Alkalinity Gunzite Pools | 100-150 ppm |