Inlays Vinyl Stickon Installation Instructions

One installation kit will install (40) 6x6 vinyl stickons or (22) 8x8 vinyl stickons. Our installtion kit must be used for all applications.

1. Prepare Surface

  • Surface should be a dry, flat plane, and free of loose debris
  • High spots should be ground off and voids filled in

2. Spray Adhesive

  • Mask off the perimeter to reduce clean up
  • Spray the application area with aerosol adhesive
  • Allow spray to dry for 15 minutes Important! Stickons will fail if not allowed to dry!
  • Spray adhesive will become slightly tacky

3. Install Marker

  • Remove the paper backing from the stickon
  • Apply the stickon to the sprayed area
  • Firmly press and drag the plastic applicator over the entire surface to eliminate air pockets

4. Edge Sealer

  • Apply edge sealing compound to the entire perimeter of the stickon
  • Important - Make sure edge sealer overlaps both the stickon and the deck surface - this ensures a moisture proof seal
  • Allow stickon to set overnight before permitting traffic
Download